Design
- Room Combine – RC Signals
- CRR – Inputs, Outputs, and Routing
- Hardware Manager – Firmware Update
- Hardware Manager – Serial Port Settings
- Conference Room Router – Why?
- AMM – Gain Sharing AMM Control Panel
- Logic - Basics
- Timers – Current Time
- Room Combine – Auto-routing Dante vs. Audio Routes
- Timers – Add to Parameter Set
- AMM – Automatic Microphone Mixer Concepts
- Groups – Renaming
- Dante – Shure Dante Mic Control Panels
- ControlSpace EX-4ML & EX-8ML Endpoints
- Under Table Boxes – Control Panels
- Hardware Introduction for ControlSpace EX-1280C
- ControlSpace Designer Introduction
- AEC – Control Panel
- CRR – Advanced Matrix
- ESP Processors and PowerMatch Amplifiers
- Groups – Node List
- Timers – Updating Objects
- Groups – Adding Gain Objects
- AEC – A Complete Guide to Reference
- Groups – Types
- Project View – Add DSP
- Parameter Sets – Updating Values
- Timers – Single, Daily, Weekly
- Parameter Sets – Recall
- AEC – The AEC Processing Object
- Parameter Sets – Deleting Objects
- Groups – Add to Parameter Set
- Room Combine – Automatic Mic Mixers
- AEC – Reference
- Logic - Logic Objects
- Timers – Adding Objects
- IP Address – Computer
- Programming Philosophy – Building a Readable Design File
- CRR – Control Panel
- Timers – Renaming
- Timers – Composite Objects
- ControlSpace EX-UH USB Endpoint
- Connecting – Retrieve Saved Design
- IP Address – Hardware
- Connecting – Associating Devices
- AGC – Enhanced AGC
- Connecting – Scan vs Go Online
- Connecting – Save to Flash
- CRR Room Combine – Why traditional room combiners cannot work for ...
- Parameter Sets – Composite Objects
- IP Networking – Find IP Address using RS-232
- CRR – RC Groups
- Groups – Composite Objects
- Dante – Dante Mics
- Logic - Parameter Set Recall
- AEC - Basics
- Logic - Predefined Objects
- Parameter Sets – Node List
- Project View – Add UTB
- Why Use an Automatic Mic Mixer
- Parameter Sets – Renaming
- Design View – Adding Objects
- Design View – Wiring
- Dante – Audio Technica Dante Mic Control Panels
- Design View – Duplicate
- Programming Philosophy – Outside In
- AMM – Gated AMM Control Panel
- Parameter Sets – Adding Objects
The ControlSpace EX-1280C conferencing processor includes 12 mic/line analog inputs, 8 analog outputs, 8 AmpLink digital outputs, 12 acoustic echo cancellers (AEC), 64x64 Dante™ and a flexible, open architecture signal processing to meet the needs of a wide variety of integrated-microphone audio conferencing applications. The open architecture design is configured using ControlSpace Designer and features drag and drop programming and allows limitless design possibilities.
FEATURES
All-in-one design supports simultaneous
VoIP, PSTN and USB soft codecs in a single 1RU model
12-channel advanced AEC routes to both analog and Dante™ inputs. Multiple references allow one EX-1280C processor to support multiple rooms, or AEC-sharing across multiple processors. Each AEC channel includes adaptable noise cancellation, non-linear processing and comfort noise to enhance the clarity and intelligibility of the meeting
2-line VoIP supports all popular codecs. A VoIP web interface allows IT personnel to configure VoIP parameters without audio system design file access or integrator involvement
PSTN connection (RJ-11) for worldwide POTS/analog telephone systems worldwide. It includes compliance certification for most countries including US, Canada, Mexico, Europe, Japan, and Australia
USB connection facilitates easy integration with PC soft codecs
Dante™ audio networking supports 64 x 64 audio channels for connection to other Dante-enabled products, including native Dante-integrated microphones
Bose AmpLink port provides an uncompressed, low-latency digital audio connection to AmpLink-equipped Bose amplifiers via a shielded CAT 5 cable
Front-panel interface features a large OLED display and rotary encoder for setting network parameters and monitoring channel activity
GPIO (5 in/5 out) for external connections including microphone pushbuttons or driving microphone LEDs
Applications
- Boardrooms
- Medium/large conference rooms
- Courtrooms
- Distance learning
- Auditoriums
- Multi-purpose spaces
SPECS
Technical Summary
Signal Processor
32-bit fixed/floating-point DSP 456 MHz/ARM Cortex-A8 600MHz
Dynamic Range
> 115 dB, A-weighted 20 Hz – 20 kHz, analog input to analog output
Input Channels
12 balanced, mic/line level
Output Channels
8 balanced, line level
PC Configuration Software
ControlSpace® Designer™ software
Mechanical Diagrams
Front View
Right View
Rear View
Bottom View
Top View
Perspective view
Product Codes
Silver
772234-1110
